How To Put Sling On Mosin Nagant

sadmin

You need 3 min read

·

Post on Feb 06, 2025

32 visitor like this post

Share

How To Put Sling Swivels On a Mosin Nagant

The Mosin Nagant rifle, a legendary firearm with a rich history, often lacks sling swivels. Adding them enhances its usability, especially for carrying and shouldering. This guide details how to install sling swivels on your Mosin Nagant, covering both the front and rear mounting points. Remember always to prioritize safety and follow all relevant firearm safety regulations.

Tools and Materials You'll Need

Before you begin, gather the necessary tools and materials:

• Mosin Nagant Rifle: Obviously! Ensure it's unloaded and the action is open.
• Sling Swivels: Choose swivels appropriate for your rifle. There are several types available; some are designed specifically for Mosin Nagants, offering a more secure fit.
• Screwdriver (likely a Phillips head): This will depend on the type of screws used on your specific swivels.
• Appropriate Wrench: Some swivels may require a wrench for tightening. Check your swivels' instructions.
• Gun Oil (optional): A small amount of gun oil can help prevent rust and facilitate smooth installation.
• Punch (optional, but recommended): A center punch can help prevent damage to your stock when driving in screws.

Installing the Front Sling Swivel

The front swivel typically attaches to the barrel band. This process can vary slightly depending on the model of your Mosin Nagant.

Step 1: Identify the Barrel Band

Locate the barrel band on the front of your rifle. This is a metal band encircling the barrel.

Step 2: Prepare the Barrel Band

Carefully examine the barrel band. You should find a pre-existing hole or a location specifically designed for a sling swivel. If there's no hole, you may need to carefully drill one (proceed with extreme caution and ensure accuracy). If you are not comfortable drilling into your rifle, seek assistance from a qualified gunsmith.

Step 3: Attach the Swivel

Insert the swivel into the barrel band's hole (or the hole you've carefully drilled). Secure it using the appropriate screw and tighten it firmly, but avoid over-tightening. Use the punch to help prevent stripping the wood, if needed.

Installing the Rear Sling Swivel

The rear sling swivel is typically mounted on the stock. Again, the precise location and method may vary based on your rifle's model.

Step 1: Locate the Mounting Point

Locate the designated mounting point on the stock. This is often a pre-drilled hole, though some Mosin Nagants may require drilling (again, proceed with extreme caution and accuracy, or consult a gunsmith).

Step 2: Prepare the Stock (if necessary)

If your stock doesn't have a pre-drilled hole, carefully mark the desired location for the hole. Use a center punch to mark the spot accurately, preventing slippage when drilling. Only drill if you have the proper tools and experience. Incorrect drilling can severely damage your rifle.

Step 3: Attach the Swivel

Carefully insert the swivel into the hole (pre-drilled or newly drilled). Securely fasten the swivel using the provided screw. Tighten firmly, but avoid over-tightening.

Choosing the Right Sling

Once the swivels are installed, choose a sling appropriate for your needs. Consider the length, material, and type of sling (e.g., single-point, two-point).

Safety First

Always prioritize firearm safety. Handle your rifle responsibly, keeping it unloaded when installing the swivels.

This guide provides a general overview. Always consult your specific rifle's manual and relevant resources for detailed instructions. If unsure about any step, consult a qualified gunsmith. Improper installation could damage your rifle.