How To Install Gas Shock Lid Suppolrt

sadmin

You need 3 min read

·

Post on Feb 08, 2025

37 visitor like this post

Share

How to Install Gas Shock Lid Supports: A Step-by-Step Guide

Are you tired of struggling with a heavy trunk lid or hood? Gas shock lid supports, also known as struts or dampers, provide a smooth and effortless opening and closing experience. This guide provides a comprehensive walkthrough on how to install these helpful automotive accessories. We'll cover everything from choosing the right supports to completing the installation process.

Choosing the Right Gas Shocks

Before you even begin, selecting the correct gas shocks is crucial. Improperly sized struts can lead to poor performance or even damage. Here's what you need to consider:

• Vehicle Make and Model: This is the most important factor. Different vehicles require different sized struts. The specifications for your vehicle should be easily accessible online or in your owner's manual.
• Length: Measure the length of your existing struts (if you're replacing them) or find the correct length specified for your vehicle model. This usually includes the extended and compressed lengths.
• Force (Pounds): This indicates the lifting power of the strut. Again, this is specific to your vehicle. Using a strut with insufficient force will result in a weak lift, while one with excessive force could be dangerous.

Pro Tip: When ordering online, always double-check the specifications against your vehicle's requirements. Contacting the supplier for assistance is highly recommended if you're unsure.

Tools You'll Need

Gather these tools before starting the installation:

• New Gas Shock Struts: Ensure these are the correct ones for your vehicle.
• Screwdriver (likely Phillips and Flathead): The type needed will depend on your vehicle's hardware.
• Socket Set (possibly): Again, this depends on the type of fasteners used.
• Wrench (possibly): May be required depending on the fastening system.
• Penetrating Oil (optional): If bolts are rusty or stuck, this can help loosen them.
• Gloves (recommended): To protect your hands.

Step-by-Step Installation Guide

Note: These steps are general. The exact procedure may vary slightly depending on your vehicle's make and model. Always consult your vehicle's service manual for specific instructions if available.

Step 1: Preparation

Begin by safely securing your vehicle. Use a parking brake and chocks on the wheels. If working on the hood, prop it open securely using a sturdy support.

Step 2: Removing Old Struts (if applicable)

Carefully remove the old gas shocks. This usually involves removing fasteners connecting the strut to both the lid (or hood) and the vehicle body. Use the appropriate tools and take photos or notes as you disassemble to aid in reassembly.

Step 3: Installing New Struts

Align the new gas shocks in their respective positions. Carefully insert the mounting bolts and tighten them securely. Do not overtighten.

Step 4: Testing

Once installed, carefully test the lift mechanism. The lid or hood should open and close smoothly and easily. If it doesn't, double check your installation, ensuring everything is properly secured.

Step 5: Final Check

Conduct a final inspection to ensure all bolts are tightened securely and the new gas shocks operate as expected.

Troubleshooting

• Strut doesn't lift properly: Check that you have the correct struts and that they are installed correctly.
• Strut is too strong: This is rare, but if the strut is excessively strong, it could damage the vehicle's lid or hood. Replace the strut with the correct one.
• Strut is too weak: Again, ensure the correct struts are installed.

Conclusion

Installing gas shock lid supports is a relatively straightforward process that can significantly enhance the convenience and ease of use of your vehicle. By following these steps and paying close attention to detail, you can successfully install these upgrades and enjoy a smoother, safer operating experience. Remember to always prioritize safety and consult your vehicle's manual for specific instructions.