How To Change Cooling Radiator Of Street Triple 675

sadmin

You need 3 min read

·

Post on Feb 07, 2025

51 visitor like this post

Share

How To Change the Cooling Radiator of a Street Triple 675

Changing your Triumph Street Triple 675's radiator might seem daunting, but with the right tools and a methodical approach, it's a manageable task. This guide will walk you through the process, step-by-step. Remember, safety first! Always work in a well-ventilated area and wear appropriate safety gear.

Preparing for the Radiator Replacement

Before you begin, gather the necessary tools and parts. You'll need:

• New Radiator: Ensure it's the correct one for your specific Street Triple 675 model year.
• Workshop Manual: A Triumph Street Triple 675 workshop manual is invaluable. It provides detailed diagrams and torque specifications.
• Drain Pan: To catch the coolant.
• Socket Set: Various sizes will be needed.
• Wrench Set: Again, various sizes.
• Screwdrivers: Phillips and flathead.
• Gloves: To protect your hands.
• Clean Rags or Shop Towels: For cleanup.
• Coolant: Use the correct type and amount specified in your workshop manual.
• Funnel: To help refill the radiator.

Step-by-Step Radiator Replacement Guide

This guide provides a general overview. Always consult your workshop manual for precise details and torque specifications specific to your bike's year and model.

Step 1: Cool Down the Engine

Crucial Safety Step: Let the engine cool completely before starting any work. A hot engine and coolant system pose a significant burn risk.

Step 2: Drain the Coolant

Locate the coolant drain valve (usually at the bottom of the radiator). Place your drain pan underneath and carefully open the valve to drain the coolant.

Step 3: Remove the Radiator

This step involves several sub-steps and varies slightly depending on your Street Triple 675's year. Consult your workshop manual for precise instructions. Generally, this involves:

• Disconnecting hoses: Carefully disconnect the coolant hoses from the radiator. Have rags ready to absorb any remaining coolant.
• Removing mounting bolts: Unscrew the bolts securing the radiator to the frame.
• Carefully removing the radiator: Gently remove the radiator, being mindful of any wiring or sensors that might be attached.

Step 4: Install the New Radiator

• Position the new radiator: Carefully position the new radiator in its mounting location.
• Secure with bolts: Tighten the mounting bolts to the specifications in your workshop manual.
• Reconnect hoses: Carefully reconnect the coolant hoses. Ensure a secure connection to prevent leaks.

Step 5: Refill the Coolant System

• Add coolant: Using a funnel, slowly add the correct type and amount of coolant to the radiator, as specified in your workshop manual.
• Check for leaks: Carefully inspect all connections for leaks.
• Start the engine: Start the engine and let it run for a few minutes to circulate the coolant. Monitor the temperature gauge and check for leaks.
• Top off coolant: Once the engine is cool, top off the coolant to the correct level.

Post-Installation Checks and Maintenance

• Pressure Test (Optional): A pressure test can help identify any leaks in the cooling system.
• Regular Inspections: Regularly check the coolant level and condition.
• Coolant Flush (Recommended): Periodically flush the cooling system to remove contaminants. Your workshop manual will provide guidance on the recommended intervals.

Troubleshooting

If you encounter problems during the installation, refer to your workshop manual or consult a qualified motorcycle mechanic. Attempting repairs beyond your skill level can lead to further damage.

This guide provides a general overview. Always prioritize safety and consult your workshop manual for specific instructions relevant to your Triumph Street Triple 675 model year. Remember to always use the correct parts and follow safety precautions. Good luck!