How To Fix Erratic Readings From Aquarite Salt Board Youtube

sadmin

You need 3 min read

·

Post on Feb 10, 2025

60 visitor like this post

Share

How To Fix Erratic Readings From Your Aquarite Salt Board: A Troubleshooting Guide

Many pool owners rely on Aquarite salt chlorine generators for effortless pool sanitation. However, erratic readings from your Aquarite salt board can be frustrating and lead to inconsistent chlorine production. This comprehensive guide will walk you through troubleshooting and fixing common causes of these inaccurate readings. We'll explore potential problems and offer practical solutions to get your Aquarite system back on track.

Understanding Erratic Aquarite Salt Readings

Before diving into solutions, it's crucial to understand why your Aquarite salt board might be showing erratic readings. These inconsistencies can stem from various factors, including:

• Faulty Salt Sensor: The salt sensor is the heart of the system. A dirty, corroded, or damaged sensor will provide inaccurate salinity readings, leading to erratic chlorine generation.
• Electrode Issues: The cell's electrodes can become scaled or fouled, impacting conductivity and throwing off the salt reading.
• Wiring Problems: Loose connections or damaged wiring within the system can disrupt the flow of information, resulting in inaccurate readings.
• Software Glitches: Occasionally, software glitches within the Aquarite control board itself can contribute to inaccurate readings.
• Incorrect Salinity Levels: If the actual salt level in your pool is significantly off from the ideal range, the sensor might struggle to provide accurate readings.

Troubleshooting Steps: A Step-by-Step Guide

Let's tackle the most common culprits and how to address them:

1. Cleaning the Salt Sensor

This is often the first and most effective solution. Follow these steps:

• Turn off the system: Always disconnect power to the Aquarite system before performing any maintenance.
• Locate the sensor: Identify the salt sensor, usually located within the cell housing or a nearby probe.
• Gently clean the sensor: Use a soft brush and a solution of warm water and a mild cleaner (avoid harsh chemicals) to carefully clean the sensor. Avoid scratching the sensor surface.
• Rinse thoroughly: Rinse the sensor with clean water to remove any remaining debris.
• Reconnect and test: Carefully reconnect the sensor and power on the system. Check for improved readings.

2. Inspecting and Cleaning the Electrodes

Scale buildup on the electrodes can significantly impact conductivity.

• Inspect the cell: Carefully examine the electrodes within the chlorine generator cell for any scaling or fouling.
• Clean the electrodes (if necessary): Consult your Aquarite manual for specific cleaning instructions. Generally, a solution of dilute muriatic acid (following safety precautions) can be used to remove scale. Always exercise caution when working with chemicals. Consider professional cleaning if you are uncomfortable with this process.
• Rinse thoroughly: Rinse the cell thoroughly with clean water after cleaning.
• Reinstall and test: Reinstall the cell and monitor the salt readings.

3. Checking Wiring and Connections

Loose or corroded wiring can cause electrical interference and inaccurate readings.

• Inspect all connections: Carefully examine all wiring connections between the salt sensor, the Aquarite control board, and the power supply.
• Tighten loose connections: Secure any loose connections.
• Look for damage: Replace any damaged or corroded wiring. This might require professional assistance.

4. Addressing Software Glitches

In rare cases, a software glitch can be the culprit.

• Reset the system: Try resetting your Aquarite system to factory settings (refer to your owner's manual for instructions). This will clear any temporary software errors.
• Check for software updates: Check the manufacturer's website for any available software updates for your Aquarite model.

5. Verifying Pool Salinity Levels

Incorrect salt levels can throw off the sensor's readings.

• Test your pool water: Use a reliable pool test kit to accurately measure the salinity levels in your pool.
• Adjust salt levels (if necessary): Adjust the salt levels to fall within the recommended range specified in your Aquarite manual.

When to Call a Professional

If you've followed these steps and are still experiencing erratic readings, it's best to contact a qualified pool professional. A professional can diagnose more complex issues, such as internal control board problems or faulty components that might require replacement.

By following these troubleshooting steps, you can often resolve erratic readings from your Aquarite salt board and restore consistent chlorine generation to your pool. Remember safety first, always disconnect power before performing any maintenance.