How To Convert Cordless Cellular Blinds To Corded Youtube

sadmin

You need 3 min read

·

Post on Feb 05, 2025

57 visitor like this post

Share

How to Convert Cordless Cellular Blinds to Corded: A Step-by-Step Guide

Cellular shades offer excellent insulation and light control, but cordless options can sometimes be inconvenient, especially for those with young children or pets. This guide shows you how to convert cordless cellular blinds to corded blinds, regaining the ease of use of a traditional cord system. Note: This conversion is not always possible, depending on the specific type of blinds. Always check the manufacturer's instructions before attempting this process.

Assessing Your Cordless Cellular Blinds

Before you begin, it's crucial to carefully examine your blinds. This conversion requires accessing the internal mechanism of the blind.

• Identify the Mechanism: Determine how the cordless lift mechanism works. Some use a spring system, while others might have a different internal operating system. Understanding this is critical for a successful conversion.
• Check for Accessibility: Can you easily access the internal components of the blind without causing damage? If the blind is sealed or the internal parts are inaccessible, conversion might not be feasible.
• Measure Your Blinds: Note the width and height of your blinds for purchasing appropriate replacement parts, should they be needed.

Materials You Might Need

Depending on your blind's mechanism and design, you may require some or all of the following:

• Replacement Cord: The type and length of cord needed will vary depending on your blind size. Consider purchasing a slightly longer cord to allow for adjustments.
• Small Screws: To secure the new cord mechanism (if necessary).
• Screwdriver: A small, precise screwdriver to work with the small screws.
• Pliers: To help with manipulating the cord.
• Scissors: To cut the cord to the correct length.
• Optional: New Bottom Rail: In some cases, you might need a replacement bottom rail to accommodate the new cord system.

Step-by-Step Conversion Process (General Guide)

This is a general guide; the exact steps might vary based on your specific blind model. Always refer to your manufacturer's instructions if available.

Disclaimer: This process involves disassembling your blinds. If you are uncomfortable with this, it's recommended to seek professional assistance.

Step 1: Disassembly: Carefully remove the blind from its mounting bracket. This may involve unscrewing the brackets or releasing clips, depending on your installation type. Take photos as you go to aid in reassembly.

Step 2: Accessing the Mechanism: Carefully open the blind and expose the internal lift mechanism. This usually involves removing a cover or panel. Again, take pictures to document the process.

Step 3: Installing the Cord Mechanism: This is the most complex part and will heavily depend on your blind type. You might need to:

• Attach a new cord: Carefully thread the replacement cord through the mechanism, following the logic of how the cordless system worked. You might need to remove old parts to make room for the new cord.
• Connect to Existing Parts: You might need to adapt the new cord to connect to any pre-existing components of the blind’s lifting mechanism.

Step 4: Reassembly: Once the cord is correctly installed and the mechanism works smoothly, reassemble the blind carefully, ensuring all parts are correctly positioned.

Step 5: Reinstallation: Mount the blind back to its original position, ensuring it operates correctly.

Troubleshooting and Tips

• If the blind doesn't lift smoothly: Double-check the cord's routing and tension within the mechanism.
• If the cord is too short or too long: You might need to adjust it or replace it with a cord of the correct length.
• Consult a professional: If you encounter difficulties, it's best to seek help from a professional blind repair technician. They possess the expertise and tools to handle more complex conversions.

Conclusion

Converting cordless cellular blinds to corded blinds can be a rewarding DIY project, but it requires patience and careful attention to detail. Always prioritize safety and consult your manufacturer’s instructions or a professional if you have any doubts. Remember to take pictures throughout the process to ensure easy reassembly. By following these steps, you can restore the functionality and convenience of a corded system to your cellular shades.